V-Gard® Arc Visors
View Part Numbers
These PC visors are engineered to help protect against impact and dangerous arc flash hazards. They are perfect for electrical workers and electricians working with high-voltage connections.
Note: V-Gard Arc Visors are intended to be used only with dielectric frames and helmets.
V-Gard® Arc Visors
Part Number
Description
p/n 10115847:
- 9.25” (23.5 cm) x 18” (45.7 cm) x .065” (1.7 mm).
- Impact-rated protection.
- Extended length and width for greater coverage of face and neck.
p/n 10118480:
- 8” (20.3 cm) x 17.25” (43.8 cm) x .065” (1.7 mm) + 3.02” (7.7 cm )(chin protector length).
- Impact-rated protection.
- Includes V-Gard Standard Chin Protector (required to achieve arc rating); must be assembled
- onto visor by user.
Markets: Construction, General Industry, Mining, Oil & Gas, Utilities
Approvals subject to change without notice and may differ based on configuration, part number and/or country.
Contact Customer Service or check approval label on product for specific approval information.
- USA Approvals
p/n 10115847:
- Meets requirements for ANSI/ISEA Z87.1-2015.
- Rated to 16.0 cal/cm2 when tested to ASTM F2178-17b, (ref. NFPA 70E-2015, PPE Category 2), and when worn with a V-Gard Hard Hat (PN 475358) and V-Gard Frame (PN 10115730).
p/n 10118480:
- Meets requirements for ANSI/ISEA Z87.1-2015.
- Rated to 21.0 cal/cm2 when tested to ASTM F2178-17b (ref. NFPA 70E-2015, PPE Category 2), and when worn with a V-Gard Hard Hat (PN 475669), V-Gard Frame (PN 10116627), and V-Gard Standard Chin Protector (PN/10115827).
Call MSA Customer Service (800-MSA-2222) for protection levels when using these V-Gard Arc
Visors with other V-Gard Frames and MSA Helmet combinations.
Please contact customer service for pricing and availability.